HPV4
The Brand, HPV4 directional control valves are small and compact. The HPV4’s were designed primarily for use with hand pumps and other low flow applications where size weight and appearance are important. Three-position detent (D) holds the spool in neutral or either active position. Closed center (standard) blocks all ports when in neutral. Tandem center…
Read MoreDS
The Brand DS Series is a 6-way two position double selector valve. We offer this valve with four different operators: electric, pilot, manual lever and manual knob. This valve is typically used to divert flow between two separate circuits. The standard selector spool (open cross-over) allows operation of two double acting cylinders or two reversible…
Read MoreMS
The Brand, MS two-position manual selector valves are available in two different sizes MS75 /MS12 and MS16-SAE. The MS16-SAE allows up to 45 gpm (170 lpm) out of either port and has a manual handle for effortless shifting of the spool. The MS75/ MS12 allows up to 30 gpm (113 lpm) out of either port…
Read MoreLA
The Brand auto-cycle valve will cycle a double acting cylinder from retracted to fully extended and then back to fully retracted using two spools. The first spool can be used to manually extend and retract cylinder while the second spool only retracts the cylinder. Pushing both levers forward starts the autocycle process. The first hydraulic…
Read MoreTS
The Brand mono block directional control valve is available in one (TS1), two (TS2) and three (TS3) spool configurations. This valve was designed for applications in which one valve is required to operate separate circuits independently. The TS offers parallel, tandem center 4-way, open center 4-way(motor spool), and tandem 3-way spools. The valve is also…
Read MoreLV
The Brand LV22, loader directional control valve, is a superbly designed two spool mono-block valve suitable for Front End Loaders. The LV22 offers two parallel, tandem center 4-way work sections available with two of the following spool actions: float, regenerative or spring-to-center. The valve is also field convertible to closed center or power beyond with…
Read MoreMB
The Brand MB, monoblock directional control valve, is a superbly designed mono-block spool valve suitable for applications requiring one valve to perform up to three separate functions. The MB valve is available in one (MB21), two (MB22) or three (MB23) spool configurations. The valve is also field convertible to closed center or power beyond with…
Read MoreDC Series / MDC Series
The Brand, DCF directional flow control valve combines the features of a four-way directional control valve, a full range pressure compensated by-pass type flow control valve, and a pilot operated pressure relief valve, all in one compact package. This valve reduces the number of fittings, plumbing and potential leakage points in hydraulic circuits. The manual…
Read MoreSDCF
The Brand, SDCF combines the features of a four-way directional control valve, a full range pressure compensated by-pass type flow control valve, and an adjustable pilot operated pressure relief valve all in one compact package. This valve reduces the number of fittings, plumbing and potential leakage points in hydraulic circuits. The manual handle allows the…
Read MoreLS
The Brand, LS 4-way directional control valve is designed primarily for log splitters. The manual adjustable handle provides fine metering to either port. Port flow is directly proportional to the movement of the lever. The tank port must be plumbed directly back to tank.
Read More