- Series 20 – 4-way manual sectional directional control, 0-6 gpm
- Electronic Interface Card "EC0004A"
- Loader Valve
- Spreader Package
- Custom Electronic Packaging
- New Relief Option on "EFC"
- 6-Way Manual Selector Valve “MS6”
- Large Electronically Adjustable Proportional Pressure Compensated Flow Control
- Series 36-38 and EFC Valve Package
Series 20 – 4-way manual sectional directional control, 0-6 gpm
FEATURES:
- O’RING PORTS to eliminate leakage.
- METERING SPOOLS provide smooth control of load.
- POWER BEYOND CAPABILITY to fit your multi-valve circuits.
- PRECISION GROUND IOSSO PLATED SPOOL that assure long life.
- DIAMOND HONED SPOOL BORE provide consistent spool fit with low leakage.
- ENCLOSED HANDLES increase handle rigidity and eliminate exposure to the elements.
- INDIVIDUAL LOAD CHECK built into each section to prevent the load from dropping when the spool is shifted.
- ALL SECTIONS & ASSEMBLIES ARE 100% TESTED including both internal & external leakage & flow tests.
Link to Series 20 section of website.
Electronic Interface Card "EC0004A"
Din rail mount, Din35 and Din 32.
Reverse polarity protection
Short circuit protection
Pulse Width Modulated Output.
Current controlled output, maintains output current regardless of supply voltage and coil resistance variations.
Capable of accepting four industry standard signal types: Potentiometer, 0-10V, 0-5V, or 4-20mA.
Reference voltage provided for control via an external potentiometer.
Proportional Indicators for Input signal and Output signal, plus an on/off power and potentiometer status indicator.
Two Enable lines are provided, one with adjustable soft stop, both with adjustable soft start.
Independent ramp adjustments up and down, 0.1 -12 seconds.
Maximum current adjustment does not affect the Minimum current adjustment.
Wide voltage supply range 12-30 VDC
Link to EC0004 section of website.
Loader Valve
The LV22… is Brand Hydraulics newest addition to their family of Hydraulic valves. The LV22… series is designed primarily for the loader market, but is ideal for any application where control of two separate functions is required.
Nominally rated for 0-10 GPM (38 lpm) & 4000 PSI (275 bar) Adjustable internal relief from 1000-4000 PSI, (70-275 bar) standard setting of 2000 PSI (138 bar) Joystick or individual enclosed handle options available Individual drop load checks All porting #8 SAE Field convertible to Power Beyond or Closed Center options available Spool options include Tandem, Open, Closed, & Regeneration Spool actions include Spring Centering, Detent, Friction Detent, & Fourth Position Float Link to LV22 section of website. 
Spreader Package
The Brand Hydraulics Spreader package is used for simultaneous control of a feed conveyor motor and spreader wheel motor. This package can be configured for various pressure compensated flow settings up to 30 GPM at 3000 PSI. The package is available with or without adjustable relief protection. The valves can be setup to operate in parallel for closed systems or in series for open systems. Electronic control options are virtually endless. Please contact Brand Hydraulics for the options that best suite your specific application.
FEATURES:
- Handheld pendants or mounted control packages for most all environments.
- Custom electronics and circuit boards to meet customers requirements.
- Small, medium and large volumes.
- Wiring harnesses.
- Multiple types of connectors to match environment.
- Many different types of wire and cable to match application.
- Safety-interlock logic.
- Interfaces between on board truck / vehicle electronics.
- Proportional and bang-bang valving available to mate with package.
- Custom machining of enclosures.
- Engineered specifically for easy installation.
- Modifications to our standard products to meet customer needs.
- Custom nameplates with customers company name and logo.
GENERAL INFORMATION:
Brand now offers one-source custom control packages, engineered to meet your specific requirements. We can be your single source solution for hydraulic and electronic control needs. Eliminate the complications caused by multiple suppliers of hydraulics & electronics. Please feel free to contact our engineering staff to discuss your application and get a quote.
GENERAL INFORMATION
HIGH LIFT BALL SPRING RELIEF - The high lift ball spring relief (R) reduces plumbing and provides relief protection. Once the pressure on the inlet port increases above the relief setting the relief valve opens and diverts flow to the EX port while maintaining pressure on the IN port. The EX port must be plumbed back to tank for this relief to work. This relief does not chatter and the cracking pressure from low to high flow is virtually the same. The relief is easily adjustable by simply loosening the lock nut and turning the adjusting fitting.
6-Way Manual Selector Valve “MS6”
FEATURES:
- PRECISION GROUND IOSSO PLATED SPOOL that assures long life.
- O'RING PORTS to eliminate leakage.
- RIGID HANDLE allows customer to shift spool smoothly.
- STANDARD TWO POSITION DETENT to hold spool in either active position.
- STANDARD POLYPAK SEALS for an increased pressure rating.
GENERAL INFORMATION
The Brand, MS6 six-port selector valve comes standard with two-position detent and manual handle. Both ports on the top of the valve serve as the inlet and outlet while the ports on either side are plumbed into two separate circuits. The MS6 allows up to 45 gpm out of either side ports while the other set of side ports are closed.Link 6-Way Manual Selector Valve “MS6”
Large Electronically Adjustable Proportional Pressure Compensated Flow Control
FEATURES:
- PRECISION GROUND HEAT TREATED SPOOL that assures long life.
- DIAMOND LAPPED SPOOL BORE provides consistent spool fit with low leakage.
- EVERY LEFC IS TESTED for linearity and pressure compensation.
- STANDARD 3-PORT allows for pressure compensated flow out of two ports.
- OPTIONAL MANUAL OVERRIDE when electrical power is lost.
GENERAL INFORMATION:
The Brand, LEFC (large electronically adjustable proportional pressure compensated flow control) is an electronically controlled version of the original large FC51 style flow control valve. The LEFC performance as a flow control is very similar to the large FC51 because they both use the same spring and compensator spool. Thus, the control flow port (CF) and the excess flow port (EX) remain usable and pressure compensated.
The main advantage of the LEFC over the large FC51 is that the flow can be adjusted proportionally with a solenoid instead of manually. The orifice spool proportionally opens as the current through the solenoid increases, thus increasing the flow out of the CF port (similar to positioning the rotary side lever on the manual FC). The solenoid is connected to our optional EC - series controls which can be sold with the LEFC. Please see the Electronic Controllers section for your control needs. We also give the choice of coil voltage, coil terminal and maximum flow setting.
Link to LEFC section of website.
Series 36-38 and EFC Valve Package
FEATURES:
- ADAPTABLE TO AUTOMATED CIRCUITS for four-way directional speed control.
- CONTROL AND WIRING HARNESS PACKAGES available to fit customer’s application.
- OPEN OR CLOSED PACKAGES are available to suit the customer’s needs.
- PRECISION GROUND HEAT TREATED SPOOLS assure long life.
- DIAMOND LAPPED SPOOL BORE provides consistent spool fit with low leakage.
- O’RING PORTS to eliminate leakage.
- PILOT CARTRIDGES assures positive force to shift spool.
GENERAL INFORMATION:
The Brand, 36EFC provides the functionality of Brand’s Series 36-38 stack valve combined with the precise flow control of our EFC valve. This allows users to proportionally control the input flow to the stack valve in one complete package. For example, a motor’s speed on a winch can be controlled in forward and reverse. The 36EFC may also electrically control the rate at which a cylinder extends or retracts. Please refer to EFC, series 36 and series 38 literature for information on work sections, valve capabilities and work section model codes.
Link to Series 36EFC section of website.
Contents ©2003 BRAND HYDRAULICS. All Rights Reserved.
[Back to the Main Page]
