FEATURES:

• INDIVIDUAL LOAD CHECK built into each section that prevents the load from dropping when the spool is shifted.
  
• PRECISION GROUND CHROME PLATED SPOOL that assures long life.
  
• DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage.
  
• METERING NOTCHES give smooth control of load.
  
• ADJUSTABLE HANDLES position handle in any location from 90° up to 90° down.
  
• SPECIAL MODIFICATIONS are easily made to fit your particular application.
  
• O’RING PORTS to eliminate leakage.
  
• PARALLEL OR SERIES flow paths are possible.
  
• ALL SECTIONS & ASSEMBLIES ARE 100% TESTED includes both internal & external leakage tests & flow tests.
  
• POWER BEYOND CAPABILITY to fit your multi-valve circuits.

  ---

  SPECIFICATIONS: 12 gpm Nominal Capacity (see flow chart) 3500 psi (241 bar). 400 psi (27 bar) max tank pressure. 12 sections max (consult factory for more). 10 Micron Filtration Recommended. Assembly Torque = 85 inch-lbs. Weight -Inlet/outlet = 6 lbs. (2.7 kg). Low spool section = 4 lbs. (1.8 kg). High spool section = 6 lbs. (2.7 kg). Port Sizes Inlet/outlet #10SAE (7/8 - 14). Work Ports #8SAE (3/4 - 16).

  MATERIALS: Cast Iron Body. Hard Chrome Plated Steel Spools Buna N O’Rings (standard). Stress Proof Steel Handles & Tie Rods Delrin Load Check Poppet

  Contents ©2003 BRAND HYDRAULICS. All Rights Reserved.
  

  [Features] [General Information] [Creating Section Numbers] [Flow Charts] [Dimensional Data] [Series 34 Download] [SERIES 34]