Die-Cast Endcap:
Beginning November 10, 2003, Brand will start using a die cast end-cap on AO, SDCF, LS and TS valves. Overall length, where this end-cap is used, will increase by 4/10 of an inch. This end-cap is going to be used on all of the following options: spring centering (S), friction detent (F1), 3-position detent (D), spring offset (SO), spring offset (SO2), spring center/detent (SD), spring center/friction detent (SF1) and two-position detent (2D and D2).
Parts List:
| B5057
... 7/16 Steel ball
DC7604 3/16 Steel ball SF314B Centering spring SF315 ... Spacer SF327 ... 5/16-18x1-1/2 Bolt SF327A Shoulder bolt |
SF328A
Washer
SF374 ... Spacer SF389 ... Spacer SF390 ... Spool stop SF477 ... Die cast end-cap SF478 ... Detent housing |
SF479
... F1 Detent sleeve
SF480 ... SD Spring center / detent SF481 ... SF1 Spring center / friction SF482 ... D 3-position detent sleeve SF483 ... Spacer SF484 ... Spacer |
SF485
... Spacer
SF486 ... 1/4-20x1-1/4 S.H.C.S. SF491 ... Detent spring SF493 ... Spacer |
 |
 |
Brands New Log Splitter SH:
Brand has redesigned its log splitter to be more price competitive. The new log splitter has a non-adjustable hydraulic kick-out that varies between 600-1200 psi. It also has an optional adjustable relief that is preset to 2000 psi. This will become our standard log splitter on November 10, 2003. Brand will still offer the SHA and HHA models. However, there will be a price increase on the SHA and HHA due to reduced production quantities. Prices listed below are for the LS valve only and cannot be applied to the AO valve. |
| Base Price: | ||
| LS755 | 3/4 NPT inlet/outlet, 1/2" NPT work ports | $85.00 |
| LS120 | #12 SAE inlet/outlet, #10 SAE work ports | $86.00 |
| Options: | ||
| SH | Single hydraulic kick-out/spring center, non-adjustable | $ N.C. |
| SHA | Adjustable single hydraulic kick-out (400-1200 psi)/spring center | $46.90 |
| HHA | Hydraulic kick-out from both directions | $80.30 |
| R | Adjustable ball spring relief for LS only, price does not apply to AO series valve | $9.00 |
| Note: All standard spools T4, O4 and C4 are included in the base price of the valve. | ||
  [Back to the Main Page]
|