MS6 -- GENERAL INFORMATION

The Brand, MS6 series valve comes standard with two-position detent and manual handle. The MS6 offers a selector spool or a series-parallel spool. Both ports on the top of the valve serve as the inlet and outlet while the ports on the sides are plumbed into two separate circuits. The MS6 allows up to 45 gpm flow.

SPOOLS – The selector spool allows you to flow out of either set of side ports while the other side ports are closed. The selector spool could be used to control two double action cylinders or two reversible motors with one 4-way directional control valve. It could also be used to control four single action cylinders with one 4-way directional control valve. The series-parallel spool allows you to direct flow to both set of side ports in series or in parallel. The series parallel spool allows you to direct flow into two motors with the flow run in parallel or in series between the motors.




Contents ©2003 BRAND HYDRAULICS. All Rights Reserved.
*_______
*** [Features] [General Information] [Creating Model Codes]
[Dimensional Data] [MS6 Catalog Download] [MS6]