FEATURES:

• O’RING PORT to eliminate leakage.
• DELRIN SEAT to seal between tank inlet and piston reservoir.
• O’RING OUTLET CHECK for zero leakage.
• O’RING SEAL between tank and casting.
• STEEL BALL RELEASE VALVE allows oil to travel to tank and relieves pressure on the outlet line.
• EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting.
• OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation.

SPECIFICATIONS: Volume Displacement HP22SA -- 0.20 in3 (3.3 cm3) (When handle is pulled). HP61DA -- 0.60 in3 (9.8 cm3) per full cycle. HP121DA -- 1.20 in3 (19.7 cm3) per full cycle. Tank sizes 95 in3 (1557 cm3), 80 in3 (1311 cm3), 65 in3 (1065 cm3), and 50 in3. (819 cm3). TL -- 2 in. (50.8 mm) tank used with remote reservoir. Pressure rating and (Standard relief setting). HP22SA -- 6000 psi, 414 bar (4000 psi, 276 bar). HP61DA -- 3000 psi (3000 psi, 207 bar). HP121DA -- 2000 psi (2000 psi, 138 bar). Outlet Port Size #6 SAE (9/16-18). Filler Port Size 1/4" NPT.

MATERIALS: Cast Iron Body Buna N O’Rings Delrin Inlet Seat Stainless Steel Piston

Contents ©2003 BRAND HYDRAULICS. All Rights Reserved.

[Features] [General Information] [Creating Model Codes] [Dimensional Data] [HP Catalog Download] [HP]