FG -- GENERAL INFORMATION
The Brand, adjustable priority flow divider comes in two basic models FG52 and FG54. The FG series
receives a single stream of fluid and divides it into two separate output streams. The priority flow is
adjustable from 0.2 to 12 gpm (.8 to 45.4 lpm) with minimal pressure drop. The priority port will maintain
the same flow setting even with an increase or decrease in the input flow.
FG52 -- is an adjustable priority divider with a ball spring relief for the priority port. The adjustable relief is set to 1500 psi (103 bar) at the factory (standard setting). The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.
FG54 -- is an adjustable priority divider with free reverse flow for both outlet ports. Flow can travel in
reverse through both outlet ports and is not metered when it travels in reverse. The non-metered flow
travels past the poppet, down the center of the valve, past the orifice spool and then through the inlet. The
two outlet flows are pressure compensating and the sum of said flows equals the inlet flow
 
[Features] [Dimensional Data] |