ECM0001 -- GENERAL INFORMATION

DESCRIPTION:
The ECM0001 was designed to simplify the wiring of Brand Series 36 and Series 38 stack valves. When a switch input is activated a corresponding work section coil terminal and the inlet coil output terminals become energized. The module is set up to run up to a 6-spool stack valve. Two ECM0001 modules can be daisy chained for control of up to 12 sections.

ECM0001 -- SPECIFICATIONS
Voltage Supply	10-35 VDC
Max Continuous Output Current / Terminal	2.5 Amps / Coil Terminal / Inlet Coil Terminal**
Inputs	12 Switch Input Terminals 4 Common Ground Terminals
Outputs	12 Coil Output Terminals 2 Common Inlet Coil Output Terminals
Operating Temperature	-20°C - 70°C (-4°F - 158°F)
Storage Temperature	-40°C - 70°C (-40°F - 158°F)
Environmental Rating	IP65 / NEMA 4
Weight, Fully Assembled	0.148 kg (0.326 lb.)
Fuse Type Series	Customer supplied 5A, Fast Acting *** AGC, GMA, ATM, ATC, ATO are all acceptable

**Inlet coil output terminals must be limited to a combined 2.5A load. The inlet coil output buss current must not exceed 2.5A.
*** 5A fuse based on controlling a 1-12 spool Brand Series 36 or Brand Series 38 stack valve.

Contents ©2003 BRAND HYDRAULICS. All Rights Reserved.

[Features] [General Information] [Dimensional Data] [Wiring Diagram] [ECM0001 Catalog Download] ["ECM0001"]